简要说明：OTTOARC牌的进口高精便携式管子平口机1/8"~1"，特别针对安装行业等现场操作产品：估价：0，规格：TSM-1000，产品系列编号：002

OD MOUNT / BATTERY 外夹式充电电池驱动

TSM-1000 is one of the smallest designed facing tools on the market today. The machine is powered by an air cooled 18V-Li Metabo battery motor and the total working weight of the machine is 6 lbs. The design of this machine makes it easy to use on job sites – making hard-to-reach areas easily accessible due to it’s small size. It has a battery powered motor, which will last for 2+ hours, with a 15 min. recharge. Collets are made from Stainless Steel material and are self-locking into the cutter to hold the collets in place.

TSM-1000便携式平口机是目前市场上最小的平口机之一。该机型由18V的Metabo锂电池电钻驱动，整机的重量约为6磅（2.6KG）。这种机型适用于安装施工现场，由于它的尺寸很小，尤其方便在空间窄小的区域工作。 电钻通过电池驱动可以持续工作2个小时以上，并且充电时间只要15分钟。夹具由不锈钢制作成，并且可以自锁于排屑 套筒上将夹具固定在正确位置。
PERFORMANCE
 • Size range 1/8” to 1” (3.175 mm - 25.4 mm)
• 18V Metabo air cooled Li powered battery motor
• Easy replacement of collets and size ranges
• Uses Stainless Steel collet set (upper / lower)
• 6 lbs. (2.6 kg) approximate working weight
• Faces most metals and plastics, including high nickel materials
• Tool bit designed to keep chip out of polished ID
• Tool bits are designed to work on the following materials: stainless steel, inconel, hastelloy, carbon steels, aluminum, and a variety of other alloys.
 性能 :
管径范围（外径）：1/8〞-1〞(3.175mm-25.4mm)；
18V的Metabo锂电池电钻驱动；
两面式刀片让刀片寿命更长；
夹具使用不锈钢材料，尺寸多且更换方便；
重量约6磅（2.6公斤），方便现场操作；
可以切削大多数的金属和塑胶，包括高镍合金材料；
设计的刀片使切屑避开管内壁；
刀片可以切削以下几种材料：不锈钢，铬镍铁合金，镍基合金，碳钢，铝合金以及其他的一些合金材料
• Battery charger: 电钻
110V;60Hz US Style / 220V;50Hz CE Compliant110V
交流；60Hz 美国标准/220V 交流；50Hz 通过CE认证

PART NUMBERS / ORDER INFO:
 配件型号/订单信息
TSM-1000 Machine Kit Includes: Machine, Battery charger，Standby battery, Tool Bits(2), Tooling, Manual and Case
标配： 平口机，充电器，备用电池，2个随机刀片，工具，手册和特制手提箱