简要说明：OTTOARC牌的进口高精电动不锈钢管平口机 1/2"~3"产品：估价：0，规格：TSM-3001M，产品系列编号：004

• OD MOUNT / ELECTRIC 外夹紧式电动驱动
  This new facing tool will face tubing from 1/2" to 3” and is designed like our TSM-4500M, but lighter in weight, approximately 19 lbs. This tool was designed with our Pharmaceutical contractors in mind. Our feed knob will give you the control you need to ensure precise lengths. This machine comes with a Metabo motor with speed control that will keep the RPM constant under load. This speed control will help extend the life of your tool bits.
  
  这款端面平口机机器可切削外径范围为0.5〞到3〞(12.7mm-76.2mm)，十分类似TSM-4500M，但是重量更轻。主要应用于制药等精密机械行业。进给旋钮方便你精确控制进给量。机器配置德国麦太保可调速电钻，可以在加载条件下保持恒定转速，延长刀具寿命。
  
   PERFORMANCE
  • Size range .5” to 3” (12.7 mm - 76.2 mm)
   • 110V variable speed control motor with electronic feedback maintains constant RPM under load
  • Less than 20” in length and 8” in overall height
  • Quick close latching system reduces setup time
  • Easy replacement of collets and size ranges
  • Adjustable measure indicator for accurate facing 0.001” or longer
  • Large view port for easy bit replacement
  • Faces most metals and plastics, including high nickel and carbon steel materials
   • Tool bit designed to keep chip out of polished ID
  
  特性：
  管径范围（外径）： 0.5〞-3〞（12.7mm-76.2mm）
   标准220V变速控制电钻，其电反馈可保持加载下的转速恒定 机身长度小于20〞（508mm），高度小于8〞(203.2mm)
   快速锁紧系统减少装、夹时间，方便更换不同尺寸夹具
  工作重量约18磅(8.16公斤) 进给刻度盘能够精确控制进给到0.001〞（0.0254mm）
   随机配置台面固定底座
  可以切割大部分金属和塑料，包括高镍合金钢和碳钢等
  刀具设计使切屑避开管内壁
  3"的管子不需要另配夹具
  
  
  PART NUMBERS / ORDER INFO:
   配件型号/订单信息
  TSM-3001M Machine Kit Includes: Machine, Tool Bits(2), Tooling, Manual and Case
  标配： 平口机，2个随机刀片，工具，手册和特制手提箱