西门子NCU573.2产品展示-西门子NCU573.2资料-西门子NCU573.2招商信息- 机电之家(jdzj.com)-中国机电行业门户网站-机电行业领军网站

Technical specifications

Order No.	6FC5356-0BB15-0AA0	6FC5357-0BB15-0AA0	6FC5357-0BB25-0AA0	6FC5357-0BB35-0AA0
Product name	SINUMERIK 840D powerline NCU 561.5	SINUMERIK 840D powerline NCU 571.5	SINUMERIK 840D powerline NCU 572.5	SINUMERIK 840D powerline NCU 573.5
Processor	Celeron			Pentium III
SIMATIC S7 - integrated	PLC 317-2 DP
Input voltage	Via SIMODRIVE device bus
Degree of protection according to EN 60529 (IEC 60529)	IP20 (with NCU box)
Humidity rating in accordance with EN 60721-3-3	Class 3K5 condensation and icing excluded. Low air temperature 0 °C (32 °F).
Relative humidity
Storage	10 ... 95 %
Transport	10 ... 95 %
Operation	< 95% for 1h, annual average < 65%
Ambient temperature
Storage	-20 … +60 °C (-4 ... +140 °F)
Transport	-20 … +60 °C (-4 ... +140 °F)
Operation	0 … 55 °C (32 ... 131 °F)
Dimensions
Width	50 mm (1.97 in)
Height	316 mm (12.4 in)
Depth	207 mm (8.15 in)
Weight, approx.	0.72 kg (1.59 lb)			1.05 kg (2.32 lb)
Approvals	CE, cULus

Ordering data:

Release (only as spare part) (product status: Cancellation/discontinuation):
6FC5357-0BB23-0AA0 (predecessor: 6FC5357-0BB22-0AE0)	SINUMERIK 840DE NCU 572.3, 400 MHZ, 64 MB WITHOUT SYSTEM SOFTWARE MEMORY: NC 0.5MB, PLC 96KB PROFIBUS-DP PREPARED ACCORDING TO IEC 61508
6FC5357-0BB33-0AA0 (predecessor: 6FC5357-0BB33-0AE3)	SINUMERIK 840D/DE NCU 573.3, 650 MHZ, 64 MB WITHOUT SYSTEM SOFTWARE MEMORY: NC 2.5MB, PLC 96KB PROFIBUS-DP PREPARED ACCORDING TO IEC 61508

NCU system software, compatibility:

  Hardware

NCU system software, compatibility subsequently tested

  NCU 572.3

6FC5357-0BB22-0AE0

12-axis software:
  6FC520-_BY30-_AH_
  6FC520-_BX30-_AH_

  SW4.4 from V04.04.38
  SW5.3 from V05.03.08
  all SW6.x

6FC5357-0BB23-0AA0

  SW4.4 from V04.04.39
  SW5.3 from V05.03.42
  all SW6.x

  NCU 573.3

6FC5357-0BB33-0AE2

  12-axis software:
  6FC520-_BY30-_AH_
  6FC520-_BX30-_AH_
  31-axis software:
  6FC520-_AY30-_AH_
  6FC520-_AX30-_AH_

   all SW4.x
  all SW5.x
  all SW6.x
  all SW7.x

6FC5357-0BB33-0AE3

  SW4.4 from V04.04.39
  SW5.3 from V05.03.18
  all SW6.x
  all SW7.x
  (see also !18682807!)

6FC5357-0BB33-0AA0

  SW4.4 from V04.04.39
  SW5.3 from V05.03.42
  all SW6.x
  SW7.2 from 07.02.07

Strategy in the spare parts business:

NCU 572.3
Predecessor  6FC5357-0BB22-0AE0  =>  successor  6FC5357-0BB23-0AA0

NCU 573.3
Predecessor  6FC5357-0BB33-0AE3  =>  successor  6FC5357-0BB33-0AA0

If there is no compatibility with the NCU software, the previous component should be used – or if this is no longer available, then an upgrade should be made to the specified update status or to the next higher update status in the meantime.

Depending on the inventory in the spare parts loop, spare part supply, supply as exchange and/or repair will be considered.

Strategy in the new part business:

NCU 572.3  =>  NCU 572.4 (or NCU 572.5)
Predecessor  6FC5357-0BB22-0AE0  =>  successor  6FC5357-0BB24-0AA0
                                                           or 6FC5357-0BB25-0AA0

NCU 573.3  =>  NCU 573.4 (or NCU 573.5)
Predecessor  6FC5357-0BB33-0AE3  =>  successor  6FC5357-0BB34-0AA0
                                                           or 6FC5357-0BB35-0AA0

The NCU *.3 components have been cancelled/discontinued effective 30.09.2004. The new replacement components in the new part business will be NCUs with integrated PLCs with a higher performance (NCU *.4 with integrated PLC 314C-2DP or NCU *.5 with integrated PLC 317-2DP):

PLC parameters

315-2DP
NCU *.3

314C-2DP
NCU *.4

317-2DP
NCU *.5

Processing time in ms/kI (1 kI = 1024 instructions, corresponds to approx. 3 kbytes)
- for bit commands (minimum)
- for commands (minimum)
Factor for cycle time for
user programs ¹⁾

0.3
1.0

1

0.1
0.25

0.35

0.03
0.1

0.12

PLC user memory in kbytes,
basic version
max. expansion

96
288

96
480

128
768

No. of FBs, FCs

Each 256

Each 256

2048 ²⁾

No. of DBs

399

399

2047²⁾

No. of timers

128

256

512

No. of counters

64

256

512

I/O scope for cyclic process image

Each 128

    Each 128

Each 256

I/O scope for the complete logical I/O address space

Each 1024

Each 1024

Each 4096 ³⁾

Max. number of Profibus slaves

63

32

125

Comments:

1)

The increase in performance refers to the computational performance available. Depending on the technological/process-related conditions, this increase in performance is included in the total result. A faster IPO clock cycle (as a result of faster processors) and lower PLC cycle times result, partially, in significantly improved technological/process-related results; e.g. shorter unit/clock cycle times, higher speeds for eccentric turning, higher feed rates for mould construction.

2)

The number specified is the upper address number that can be used; the maximum number of FBs, FCs and DBs is, as a total, 2048!
Reserved addresses should be taken into account; refer to the current documentation.

3)

4096 additional I/O addresses are available and can be seen in STEP 7; however these addresses are reserved for future applications. For compatibility reasons, these addresses may not be used.
The diagnostic addresses (presently at the upper end 1023, 1022) must be appropriately marshaled in the PLC project; refer to the current documentation.

Brief instructions: (prerequisites: SIMATIC know-how; STEP 7)
When changing-over from an NCU with PLC315-2DP to an NCU with PLC 314C-2DP or PLC317-2DP, in the hardware configuration in the module catalog, the matching Rack0 should be selected under "SIMATIC 300\SINUMERIK\810D / 840D".
Further it should be checked as to whether a Profibus diagnostics block of A&D AS (FC125 or FB125) is used. These blocks must be brought up to the actual version (V4.9).