专业：尿素专用流态化缓、控释包衣机，尿素包衣机产品展示-专业：尿素专用流态化缓、控释包衣机，尿素包衣机资料-专业：尿素专用流态化缓、控释包衣机，尿素包衣机招商信息- 机电之家(jdzj.com)-中国机电行业门户网站-机电行业领军网站

设备名称：LDP型流化床制粒包衣机

LDP FLUID-BED GRANULATOR COATER

设备特点： Features of equipment

※ 底喷流态化，物料具备严格的运行轨迹 , 因而可获得均匀、连续的衣膜

※ 粉体颗粒、丸掩味、防潮、防氧化、防水、防热、着色隔离等包衣

※ 无包衣材料损失、生产成本低

※ 雾粒到达物料线路短，无 “ 喷雾干燥 ” 之患

※ 圆柱形加速容器或倒锥体减速设计，可行微粒、大粒、小粒、微丸包衣

※ 物料分散性极好，无粘连现象

※ Coating of bottom spraying, material flow in order. We canget uniform and continuous film.

※ Taste masking, odor, moistureproof, antioxidation, prevent water, heat insulation, coloration and separation coating.

※ Low productive cost, and the coating material is used perfect.

※ Short travel distance of fog granule and without the problem of“spray drying”.

※ The design of cylinder for accelerator or cone for decelerate can Coating of granule, big granule and pellets.

※ The high separate, without adhere.

应用概述: General of applications

流化床包衣机是将流态化包衣技术与喷雾技术有机结合为一体的新型微粒包衣设备 , 广泛用于膜缓控释、骨架缓控释胶囊、丸剂包衣、颗粒、粉体包衣。
Fluid-bed coater is a new style coating equipment that combined fluid-bed spraying technology and coating well. It is wide used for film slow and control releasing coating, framework slow and control releasing capsule, pellet coating, granule, powder coating, etc.

技术参数:Technical data

规格 Specification 项目 Item		5	15	30	60	120	200	300
投料量Capacity	Kg/批 Kg/batch	4～6	10～20	25～40	40～80	80～150	150～250	按用户要求设计 By URS
容器容量 Volume of container	L	15	50	100	220	360	650
风机功率Power of fan	kw	4	5.5	7.5	15	18.5	22
压缩空气量 Consumption of compressive air	m³/min	0.4	0.6	0.9	1.3	1.8	2.4
蒸汽量 Consumption of steam	Kg/h	50	64	85	181	250	330
安装尺寸参考 Size of installation for reference	H1(mm)	2600	2850	3150	3250	3500	3800
	H2(mm)		340	490	590	790	890
	H3(mm)		2630	2930	3020	3280	3580
	B1(mm)	1010	1160	1460	1660	2060	2260
	B2(mm)	1560	1860	2460	2860	3660	4060
	φ1(mm)	550	700	1000	1200	1600	1800
	φ2(mm)	180	250	250	280	280	315
	L(mm)	850	1550	1700	1800	2000	2100

所有尺寸仅作参考, 视物料情况, 本公司拥有变更权利, 并不另行通知.

*All sizes are used for reference only. According to the condition of material, our factory has the right change but not notice, pardon!