简要说明：

台湾鹰牌、精展顶针切断研磨机（射梢切断及研磨机）

台湾鹰牌、精展顶针切断机（射梢切断机、高速切断机）

台湾精展精密切断研磨机详细说明：

1.适合模具\圆梢,不锈钢等,要求精密切断面之加工件

2.切断,研磨一次完成,可缩短工作时间,切断面角度精准

3.採快速夹具设计，夹持方便快速

4.微调分厘卡，可快速定位尺寸

5.研磨砂轮，使用中可随时微调修整，尺寸不变

6.稳定性高，磨损率低，使用寿命长

7.尺寸L430mm*W380mm*H540mm

8.定位尺长度300mm,500mm,600mm

9.砂轮片尺寸WA46K*100*50*20

10.转速R.P.M 3600

11.切割精度￠25*300±0.01/±0.02/±0.03　

12.直角精度￠25*90°±0.01/0.02/0.03

台湾鹰牌射梢切断及研磨机详细说明

ORDER NO. Cut-off precision ANGLE Cut-off sander lamina Grinding sander RPM Motor CAPA CITY WEIGHT SIZE CODE NO. Inquriy VEC-300G 25m/mØ x 300m/m ±0.01 25m/mØ x 90° ±0.01 1m/m t x 180m/mØ (Hole) 31.8m/mØ WA46K x 100 x 50 x 20 3600 3/4HP 110/220V 1 or 3 phase VEC-300G 300mm VEC-500G 500mm VEC-600G 600mm 108.6Kgs(109.4Kgs)(110.5Kgs) L430m/m x W360m/m x H500m/m 1024-010 Inquriy VEC-500G 25m/mØ x 300m/m ±0.01 25m/mØ x 90° ±0.01 1m/m t x 180m/mØ (Hole) 31.8m/mØ WA46K x 100 x 50 x 20 3600 3/4HP 110/220V 1 or 3 phase VEC-300G 300mm VEC-500G 500mm VEC-600G 600mm 108.6Kgs(109.4Kgs)(110.5Kgs) L430m/m x W360m/m x H500m/m 1024-011 Inquriy VEC-600G 25m/mØ x 300m/m ±0.01 25m/mØ x 90° ±0.01 1m/m t x 180m/mØ (Hole) 31.8m/mØ WA46K x 100 x 50 x 20 3600 3/4HP 110/220V 1 or 3 phase VEC-300G 300mm VEC-500G 500mm VEC-600G 600mm 108.6Kgs(109.4Kgs)(110.5Kgs) L430m/m x W360m/m x H500m/m 1024-012 Inquriy

FEATURES 1. During operation, the grinding sander may be micro adjusted and repaired without changing its dimensions 2. The tightness of belt may be automatically adjusted and controlled (the larger the resistance, the tighter the belt.) 3. The dimensions precision of cutting off the length of working piece are not subject to the effect of the difference of thickness of cutting – off sander piece. 4. The rapid chuck is used to hold the working quick, and Ø1-25mm is the same. 5. When operation, a shaft with two tapered ends is used for transmission and characterized by high stability low wearing rate and long life. 6. The rapid positioning rule is in the unit of 20mm and provided with a micro rule (0mm to 25mm) of which the zeroing point is the dimensions at the rapid positioning point. 7. The minimum of cutting length is 60mm