500kv线路用钢芯铝绞线(LGJ)型式试验项目特性试验 Type test item of characteristic test adapt aluminium conductor steel-reinforced used in 500 KV line.
蠕变性能参数 Wriggle variation performance parameter 试样根数:4根(仅以LGJ-720/50为例) 试验条件:试样端头间的长度:14m 试样端头处理:环氧树脂浇铸 引伸仪测试的有效长度:5000 ±1mm 试验温度:20 ±1℃ 试验精度:应力:±1% 应变:±0.01mm/5000mm 试样张力:25.59kN(15%RTS) 试样记录时间:在加载负荷reach达到后,起开始以1、2、3、4、5、6、7、10、30、60(分递增的时间纪律伸厂与相应温度值。随后3天内每1小时记录一次,第四天起至第5天内2小时记录一次,第6天起4小时记录一次,第15天起后6小时记录一次,总试验时间为1000小时 试验结果:在15%RTS、25%RTS、35%RTS的张力下的蠕变方程可推出10年(87600小时)后的蠕变量分别为280、541、794mm/km。 Sample number :4(for example LGJ-720/50) Test condition sample length: Length of two end sample:14m Treatment of two end sample:epoxy resin pouring Testing valid length of the simultaneity elongation instyument Rest temperature:20 ±1℃ Test precision: Stress: ±1% Strain: ±0.01mm/5000m Sample tension:25.59kN(15%RTS) 42.66kN(25%RTS) 59.71kN(35%RTS) sample record time:when tension loading reach a value,homologous value of elongation and temperature are recorded at the increasing time of 1、2、3、4、5、6、7、10、15、30、60minutes;following three day,the value are recorded every one hour;form day to the five day,the value are record every two hour;form the six fourteen day,the value are recorded every four hour;from the fifteen day,the value are recorded every six hour,the testing time is 1000 hour. Test result:The wreggle variation equation at the 15%RTS、25%RTS、35%RTS、tension loading can deduce the wriggle variaion value as following:280、541and 794mm/km.
振动疲劳试验 Vibratory fatigue test 振动参数:振动角25~300 ,张力为拉断力保证值的25%。 振动次数:3 × 10-7 次 试验结果:铝单线不断股。 Vibratory parameter:Vibratory angle:25~300 ,tension is the percent 25 of breaking ;oad. Vibratory time:3 × 10-7 Test result:single aluminium wire non-breaking. |