UTP A DUR 250 anti-wear
Classifications solid wire
EN 14700 DIN 8555 Material-No.
SZ Fe 1 MSG 1-GZ-250 1.8401
Characteristics and field of use
UTP A DUR 250 is used for MAG buildups on structural parts subject to rolling wear and
where a good machinability is required, such as rails and rail crossings, crane wheels,
rollers, couplings, shafts and gear parts.
UTP A DUR 250 has a very good resistance against compression and rolling strain.
The weld metal is easily machinable.
Hardness of the pure weld deposit: approx. 250 HB
Typical analysis in %
C Si Mn Cr Ti Fe
0,3 0,5 1,0 1,0 0,2 balance
Welding instruction
Machine welding area has to be metallic bright. Massive parts have to be preheated
to 300 °C.
Form of delivery and recommended welding parameters
Wire diameter (mm) Current type Shielding gas (EN ISO 14175)
1,2 DC (+) M 12 M 13 M 21
1,6* DC (+) M 12 M 13 M 21