简要说明：PEI/基础创新塑料（美国）/1000-GY6B416注塑级高刚性食品级塑料 价格合理,诚信经营,支持物流,快递和货运,电话:13412886878

PEI 基础创新塑料(美国) 1000-GY6B416，价格合理,诚信经营，可全国供货（广东省内免费送上门）。支持物流，快递和货运;支持现金，银行转账交易。

东莞市广业塑胶原料有限公司专业销售原装进口塑胶原料，原厂原包，假一赔十，本司货源稳定充足，发货准时，交期和质量均有保障！是专业塑胶原料供应商！！！可提供COA,SMDS,SGS,COC,UL黄卡和物性表及加工参数。

PEI 基础创新塑料(美国) 1000-GY6B416特性：

PEI/基础创新塑料（美国）/1000-GY6B416注塑级高刚性食品级塑料

PEI 基础创新塑料(美国) 1000-GY6B416 

PEI 基础创新塑料(美国) 1000-GY6B416

PEI 基础创新塑料(美国) 1000-GY6B416

PEI 基础创新塑料(美国) 1000-GY6B416

PEI 基础创新塑料(美国) 1000-GY6B416

PEI 基础创新塑料(美国) 1000-GY6B416 其他型号报价:

PEI 基础创新塑料(美国) 1000-GY6B416

聚酰亚胺是一类含有酰胺基的新型工程塑料。由于聚酰亚胺分子中具有十分稳定的芳杂环结构，使其表现出其它高分子材料所无法比拟的耐热性和耐低温性，其热分 解温度可达600℃，而且可在333℃下长期使用；在-269℃下仍不会脆裂。聚酰亚胺的力学性能优良，均苯型聚酰亚胺薄膜的拉伸强度可达170 MPa，联苯型可达400MPa，并且随温度升高变化很小。耐辐射性好，介电性能优异，化学性质稳定，抗蠕变能力强，摩擦性能优良。

   日前聚酰亚胺已有20多个大品种，2001年全球消费量约2.5万t，生产厂家主要集中在美国、日本、西欧等发达国家和地区。随着航空航天、汽车，尤其是 电子电气工业的快速发展，对电子元件小型化、轻量化、高功能化和高可靠性的要求，未来几年全球对聚酰亚胺的需求将以年均10％的速度增加，展示了良好的发 展前景。

   热塑性聚酰亚胺主要用于汽车发动机部件、油和气泵的盖、电子电气仪表用高温插座、连接器、印刷线路板等。

   聚酰亚胺品种众多，主要有聚醚酰亚胺、聚酰胺-酰亚胺和双马来酰亚胺等。聚醚酰亚胺目前的开发趋势是引入对苯二胺结构或与其它工程塑料组成合金，提高其耐 热性，或与聚碳酸酯、聚酰胺等工程塑料组成合金提高其力学性能；聚酰胺-酰亚胺是高强度的聚酰亚胺品种，目前发展趋势是增强改性，以及同其它塑料合金化；双马来酰亚胺是以马来酰亚胺为活性基的双官能团化合物，具有与典型热固性树脂相似的流动性和可模塑性，与环氧树脂的加工和成型基本相同，是目前国内研究的 重点。为了提高聚酰亚胺的应用性能，聚酰亚胺改性与复合材料的开发与应用成为今后相当长时间内的研究与开发热点，如聚均苯酰亚胺用石墨或聚四氟乙烯填充 后，可以明显降低摩擦系数，用于汽车止推垫圈、高温刹车片、档风玻璃刮水器和飞机的发动机用轴承、轴衬和垫圈；聚酰亚胺添加玻璃纤维或硼纤维后，被成为超 强级工程塑料，用于制备喷射发动机结构部件；含硅聚酰亚胺可以赋予材料良好的溶解性、透气性、抗冲击性、耐候性、粘合性。

我国聚酰亚胺在某些领域研究和应用已经达到世界先进水平，但与发达国家相比仍有较大差距，主要体现在：规模小，目前国内最大生产装置为100 t／a，国外基本上是千吨级规模；质量差，性能不稳定，产品不同批次性能差距较大，影响应用；最为严重的是我国产品精细化程度不够，品种少，以聚均苯四甲 酰亚胺薄膜等为主，应用领域也主要是薄膜和模塑料，而且多用于军工领域，民用较少。

   由于聚酰亚胺工程塑料应用领域广泛，发展前景良好，尤其在国防建设中起到举足轻重的作用，因此加快我国聚酰亚胺的研究与应用是非常重要和必要的。

   针对国内外发展现状，我国应该在开发好现有品种的同时，大力发展聚醚酰亚胺、聚联苯四甲酰亚胺、热塑性聚酰亚胺和双马来酰亚胺等用量较大的主要树脂产品，推进新型聚酰亚胺材料的产业化进程。尤其要加强应用研究，如改性与复合材料的应用技术研究与推广。

PEI 基础创新塑料(美国) 1000-GY6B416

Drying: PEI has moisture absorption characteristics and can lead to material degradation. Require humidity should be less than 0.02%. Recommended drying conditions for 150 ℃, 4 hours of drying.

Melting temperature: the general type of material 340 ~ 400 ℃; enhanced type of material 340 ~ 415 ℃.

Mold temperature: 107 ~ 175 ℃, the proposed mold temperature is 140 ℃.

Injection pressure: 700 ~ 1500bar.

Injection speed: Use as high as possible injection speed.

Machine selection;

PEI * resin can be molded on most standard injection molding machines. It is recommended to use reciprocating screw injection molding machine.

The two basic factors that should be considered when determining the size of the equipment used to mold a particular PEI * resin component are the total injection weight and the total projected area.

Generally, the best results are obtained when the total injection volume (all mold cavities plus runners and gates) is equal to 30 to 80% of the machine's capacity. When using a large barrel, if the injection is too small, it may unnecessarily prolong the resin retention time. If it is necessary to carry out injection molding at higher temperatures in the appropriate temperature range, the possibility of reducing the thermal degradation of the material usually requires a reduction in residence time. Therefore, in order to achieve higher temperature injection requirements, it is recommended that the minimum injection size should be greater than 60% of the machine capacity.

After determining the total projected area of the complete injection (all cavities plus the flow area of the injection pressure), a 4 to 6 ton of clamping force should be provided for the projection area per square inch in order to reduce the material's flash. Glass-reinforced resins may require slightly higher clamping forces (an estimated one tonne of clamping force per square inch). Wall thickness, process length and injection conditions determine the actual required clamping force tonnage.

Barrel Selection and Screw Design Considerations:

When processing PEI * resin, it is usually possible to use conventional manufacturing materials for day-compatible screws and barrels. It is recommended to use bimetallic barrels.

According to the screw diameter, it is best to make the aspect ratio of 20: 1, compression ratio of 2.2: 1. In addition, it is recommended to use a short feed zone (5 segments) and a long compression zone (11 segments), while gradually transitioning through a constant taper to a shorter metering zone (4 segments). Compression should be done at a constant taper of a gradual transition, as abrupt changes can lead to excessive shear and material degradation. If a specific screw can not be selected, it is proven that a universal screw with a aspect ratio of 16: 1 to 24: 1 and a compression ratio of 1.5: 1 to 3.0: 1 is successful. It is recommended that you do not use PEB * resin with vent holes. The check valve should be of the sliding reverse ring type. In the screw metering area, the circulation gap is usually at least 80% of the cross section of the flow area.

PEI amorphous, with excellent high temperature, high strength, high modulus and a wide range of chemical resistance, nature of fire, and low smoke emissions, high dielectric constant and loss factor

Product Name: ULTEM:

PEI plastic materials

※ US GE 1000-1000 / 7101,1010-1000 / 7001, ATX200, 2100, 220

product descrtption:

※ PEI amorphous, with excellent high temperature, high strength, high modulus and a wide range of chemical resistance. ※ nature of fire, and low flue gas emissions. 3, high dielectric constant and loss factor high temperature, high flow

PEI plastic raw materials (polyether imide)

The United States of America, the United States of America, the United States of America, the United States of America, the United States of America, the United States of America, the United States of America, the United States of America, the United States of America, the United States of America, the United States of America, the United States of America, Polytechnic / Japan Light: 1140A6, K531A1,6165A4 PEI United States GE 1100F-2187 PEI United States GE 1010-7101 PEI United States GE 2100 PEI United States GE 2200 PEI United States GE 2300 PEI United States GE 1000-1000 PEI United States GE 1000-7101 PEI United States GE 1010-1000 PEI United States GE 2210R-111/7301 PEI United States GE 2300R-111/7301 PEI United States GE 2310R-111/7301 PEI United States GE ATX200F

Material performance table

※ injection is not enhanced standard 1000,1000F, 1000P, 1000R

※ easy to flow 1010,1010F, 1000R

※ Pigment resin 1100, 1100F, 1100R, 1110, 1110F

※ medium heat resistance 1285, LTX300A, LTX300B

* Enhanced glass fiber reinforced type 2100, 2100N, 2100R, 2110, 2110N, 2110R, 2200, 200R, 2210, 2210R, 2300, 2300N, 2300R 2310, 2310R, 2400, 2410, 2410R

※ Grinding glass fiber reinforced type 2212,2212R, 2312,2313

※ glass fiber / mineral reinforced 3451,3452

※ Carbon fiber reinforced type 7201,7801

※ wear resistance is not enhanced 4001 enhanced 4000,4211

※ Impact change HTX1010F, HTX1050F, HTX2000F, HTX2001F

※ Resistant non-reinforced CRS5001, CRS5011, CRS5011F, CRS5011R

※ Enhanced CRS5111, CRS5112, CRS5711, CRS5201, CRS5201R, CRS5211, CRS5211R, CRS5301, CRS5311

※ aviation resin is not enhanced 9075,9076 enhanced AR9100, AR9200, AR9300

※ Hybrid PEI / PCE Hybrid ATX100, ATX100F, ATX100R, ATX200, ATX200F, ATX200R

※ PEI / PPO mixed MD133

※ Extruded aviation resin 8015, D9065

如需了解更多关于PEI 基础创新塑料(美国) 1000-GY6B416及 的详细信息，欢迎致电联系。

零风险购货10天无理由退换货

为了更好的服务客户，我公司现推出零风险采购方案，你在我公司购买的货物只要发货后10天内。你对货物有任何不满意都可以提出退换申请，在货物未拆封，不影响二次销售的情况下，我司将给你办理退换手续并承担运费，为你免去任何担忧。

PEI 基础创新塑料(美国) 1000-GY6B416今日新闻：

塑料期货市场迎来第十个年头。十年里，线型低密度聚乙烯（LLDPE）、聚氯乙烯（PVC）和聚丙烯（PP）期货品种先后登陆期货交易市场，大连塑料期货市场规模不断扩大、产业客户参与积极性日益提高，形成了品种较为完善、功能有效发挥的塑料期货品种体系。由大商所主办的第十届“中国塑料产业大会”于5月24日在杭州黄龙饭店召开。

5月23日下午浙商期货在围绕“聚烯烃产业与全球视角下的塑料行情解析”开展了塑料产业大会同期活动。

大连商品交易所工业品事业部高级经理周立波首先对大连商品交易所塑料品种规则进行了详细解读与梳理，并且对近年来针对塑料期货交割规则的调整作了进一步解释，最后，周立波总结了大商所在化工品种方面做得努力以及未来的努力方向：第一，全产品覆盖；第二产业链延伸；第三，石化产品库。

IHS 中国聚烯烃市场总监王兵利针对PE和PP两品种分别讲述了当前市场发展情况以及未来发展预测。