| 详细介绍：
山东济南骏焊总代理上海斯米克银焊条银焊丝 铸铁焊条焊丝 不锈钢焊条焊丝 耐磨焊条耐磨焊丝 镍基合金焊条镍基合金焊丝 铝焊丝焊条 铜焊条焊丝 特种焊接材料
上海斯米克焊条
【上海斯米克电焊条】简介
|
Category
类 别
|
Trade-
Mark
牌 号
|
Equivalent to China Standard
相当国标
|
Characteristics & application
特性和用途
|
Equivalent to AWS
相当AWS
|
|
Hard-surfacing
硬
面
堆
焊
|
D 667
|
EDZCr-B-15
|
HRc≥48. Resistance to wear, gas corrosion and oxidation. Hardfacing of blast furnace hopper and cracker part.
HRc≥48，耐磨、耐气蚀、抗氧化。堆焊高炉料钟、破碎机件
|
|
|
D 802
|
EDCoCr-A-03
|
HRc38-47. Resistance to heat, wear and corrosion. Hardfacing of high temperature part such as the edge of thermo-cutter.
HRc38-47，耐热、耐蚀、耐磨。堆焊高温工件如热剪切刀刃
|
ECoCr-A
|
|
D 812
|
EDCoCr-B-03
|
HRc45-50. Resistance to heat, wear and corrosion. Hardfacing of high temperature part such as internal-combustion engine valve.
HRc45-50，耐热、耐蚀、耐磨。堆焊高温工件如内燃机阀
|
ECoCr-B
|
|
D 822
|
|
HRc≥53. Resistance to Wear and heat, bad shock resistance. Hardfacing of rotating blade wheel of boiler.
HRc≥53，耐热、耐磨，但抗冲击性差。堆焊锅炉旋转叶轮
|
|
|
D 832
|
EDCoCr-C-03
|
HRc≥50. Wear and heat resistance. Hardfacing of high temperature part such as hot-rolling guided way.
HRc≥50，耐热、耐磨。堆焊高温工件如热轧导轨
|
ECoCr-C
|
|
D 842
|
EDCoCr-D-03
|
HRc28-38. Corrosion and thermo-fatigue resistance, work harding. Hardfacing of hot forging die.
HRc28-38，耐蚀、抗热疲劳，具有加工硬化性。堆焊热锻模
|
|
|
Cast iron
铸
铁
|
Z 308
|
EZNi
|
Pure nickel, excellent general properties. Used to weld thin cast iron part and repair welding machined surface, such as guided way of machine tool.
纯镍，综合性能好。铸铁薄件及加工面补焊用，如机床导卫
|
ENi-Cl
|
|
Z 408
|
EZNiFe
|
Iron nickel, high strength and excellent ductility. Repair welding of important gray cast iron and nodular cast iron, such as cylinder cap.
镍铁，强度高、塑性好。重要灰铸铁及球铁焊补用，如汽缸盖
|
ENiFe-Cl
|
|
Z 508
|
EZNiCu-1
|
Copper nickel, good machinability and bad crack resistance. Repair welding of sand hole and gray cast iron machined surface subject to no load.
镍铜，易加工，但抗裂性较差。不受力的灰铸铁加工面及砂眼补焊
|
ENiCu-B
|
|
Copper alloys
铜
合
金
|
Cu 107
|
ECu
|
Red copper, atmosphere and sea water corrosion and excellent electric conductivity. Welding of red copper such as electrical copper row.
紫铜，耐大气，海水腐蚀，导电性好。紫铜焊接用，如导电铜排
|
ECu
|
|
Cu 207
|
ECuSi
|
Silicon bronze, corrosion resistance and high strength. Welding of copper, silicon bronze and brass.
硅青铜，耐蚀、强度高。铜、硅青铜及黄铜焊接用
|
ECuSi
|
|
Cu 227
|
ECuSnB
|
Tin phosphor bronze, corrosion resistance and high strength. Welding of copper, silicon bronze and brass.
锡磷青铜，耐蚀、强度高。铜、硅青铜及黄铜焊接用
|
ECuSn-C
|
|
Cu 237
|
ECuAl
|
Aluminum bronze, wear and corrosion and high strength. Welding or surfacing of copper alloys.
铝青铜，耐磨、耐蚀，强度高。铜合金焊接或堆焊用
|
ECuAl-A2
|
|
Aluminum alloys
铝
合
金
|
Al 109
|
TAl
|
Pure aluminum, excellent corrosion resistance and middle strength. Welding of pure aluminum.
纯铝，耐蚀性好，但强度不高，纯铝焊接用
|
E1100
|
|
Al 209
|
TAlSi
|
Silicon aluminum, good crack resistance and wide range of usage. Welding of aluminum alloys other than aluminum magnesium alloys.
铝硅，抗裂性好，通用性大。铝合金焊接用，不宜焊接铝镁合金
|
E4043
|
|
Al 309
|
TAMn
|
Manganese aluminum, corrosion resistance and high strength. Welding of aluminum alloys.
铝锰，强度高，耐蚀。铝合金焊接用
|
E3003
|
|
Nickel alloys
镍合金
|
Ni 102
|
ENi-1
|
Pure nickel. Welding and surfacing of nickel and nickel to steel.
纯镍，用于镍、镍与钢的焊接与堆焊
|
ENi-1
|
|
Ni 207
|
ENiCu-7
|
Copper nickel. Welding and surfacing of copper nickel and copper nickel to steel.
镍铜，用于镍铜、镍铜与钢的焊接与堆焊
|
ENiCu-7
|
|
Category
类 别
|
Trade
mark
牌 号
|
Chemical composition
主要成份(%)
|
Characteristics & application
特性和用途
|
Equivalent to AWS
相当AWS
|
|
Hardfacing
硬
面
堆
焊
|
S 101
|
C3 Cr28 Ni4
Si3.5 Fe Rem.
|
HRc48-54. Resistance to wear, gas corrosion and oxidation. Hardfacing of bucket tooth and case pump.
HRc48-54，耐磨、耐气蚀、抗氧化。堆焊铲斗齿，泵套
|
|
|
S 111
|
C1 Cr29 W5
Co Rem.
|
HRc38-47. Resistance to wear and corrosion at high-temperature. Hardfacing of high temperature and pressure valve.
HRc38-47，高温下耐磨、耐蚀。堆焊高温高压阀门
|
ECoCr-A
|
|
S 112
|
C1.5 Cr29 W8
Co Rem.
|
HRc45-50. Resistance to wear and corrosion at high-temperature. Hardfacing of valve and hot-rolling pass.
HRc45-50，高温下耐磨、耐蚀。堆焊阀门，热轧孔型
|
ECoCr-B
|
|
S 113
|
C2.5 Cr30 W17
Co Rem.
|
HRc≥55. Wear and heat resistance at high temperature, bad shock resistance. Hardfacing of screw charging carriage.
HRc≥55，高温下耐磨、耐热，但抗冲击性差。堆焊螺旋送料机用
|
|
|
S 114
|
C2.5 Cr30 W12
Co Rem.
|
HRc≥53. Wear and heat resistance at high temperature, bad shock resistance. Hardfacing of three-cone bit.
HRc≥53，高温下耐磨、耐热，但抗冲击较差。堆焊牙轮钻头
|
ECoCr-C
|
|
Copper
alloys
铜
合
金
|
S 201
|
Sn1 Si0.3Mn0.3
Cu Rem.
|
Good mechanical properties and crack resistance. Gas welding and argon arc welding of red copper.
机械性能好，抗裂性好。紫铜气焊及氩弧焊用
|
ERCu
|
|
S 211
|
Si3 Mn1
Cu Rem.
|
Good mechanical properties. Argon arc welding of copper alloys and MIG brazing of steel.
机械性能好，铜合金氩弧焊及钢的MIG钎焊用
|
ERCuSi-Al
|
|
S 212
|
Sn5 Cu Rem.
|
Wear resistance. Argon arc welding of copper alloys and surfacing of steel.
耐磨性好。铜合金氩弧焊及钢的堆焊用
|
ERCuSn-A
|
|
S 213
|
Sn8 Cu Rem.
|
Wear resistance. Argon arc welding of copper alloys and surfacing of steel.
耐磨性好。铜合金氩弧焊及钢的堆焊用
|
ERCuSn-C
|
|
S 214
|
Al7.5 Cu Rem.
|
Wear and corrosion resistance. Argon arc welding of copper alloys and surfacing of steel.
耐磨、耐蚀。铜合金氩弧焊及钢的堆焊用
|
ERCuAl-A1
|
|
S 215
|
Al9 Cu Rem.
|
Wear and corrosion resistance. Argon arc welding of copper alloys and surfacing of steel.
耐磨、耐蚀。铜合金氩弧焊及钢的堆焊用
|
ERCuAl-A2
|
|
S 221
|
Cu60 Sn1 Si0.3
Zn Rem.
|
Melting point is about 890℃. Gas welding and carbon arc welding of brass, also braze welding of copper, steel and cast iron.
熔点约890℃。黄铜气焊及碳弧焊用，也可钎焊铜、钢、铸铁
|
|
|
S 221F
|
Cu60 Sn1 Si 0.3
Zn Rem.
|
S221 welding rod coated with flux.
外涂焊剂的S221焊丝
|
|
|
S 222
|
Cu58Sn0.9Si0.1
Fe0.8 Zn Rem.
|
Melting point is about 880℃. Gas welding and carbon arc welding of brass, also braze welding of copper, steel and cast iron.
熔点约880℃。黄铜气焊及碳弧焊用，也可钎焊铜、钢、铸铁
|
RBCuZn-C
|
|
S 222F
|
Cu58Sn0.9Si0.1
Fe0.8 Zn Rem.
|
S222 welding rod coated with flux.
外涂焊剂的S222焊丝
|
RBCuZn-C
|
|
S 223
|
Cu59 Sn0.6
Zn Rem.
|
Melting point is about 900℃. Braze welding of copper, steel and cast iron.
熔点约900℃。铜、钢、铸铁钎焊用
|
RBCuZn-A
|
|
S 224
|
Cu62 Si0.5
Zn Rem.
|
Melting point is about 905℃. Gas welding and carbon arc welding of brass, also braze welding of copper, steel and cast iron.
熔点约905℃。黄铜气焊及碳弧焊用，也可钎焊铜、钢、铸铁
|
|
|
Copper
alloys
铜
合
金
|
S 225
|
Cu48 Ni10
Zn Rem.
|
Melting point is about 935℃ and high strength. Braze welding of steel, nickel and carbide alloys.
熔点约935℃。高强度,钎焊钢、镍及硬质合金用
|
RBCuZn-D
|
|
S 225F
|
Cu48 Ni10
Zn Rem.
|
S225 welding rod coated with flux.
外涂焊剂的S225焊丝
|
RBCuZn-D
|
|
S 226
|
Cu60 Sn0.3
Si0.2 Zn Rem.
|
Melting point is about 900℃. Gas welding of brass, also braze welding of copper, steel and cast iron.
熔点约900℃。黄铜气焊用，也可钎焊铜、钢、铸铁
|
|
|
S 227
|
Cu58Sn0.9Ni0.5
Si0.1 Fe0.8
Zn Rem.
|
Melting point is about 880℃. Gas welding and carbon arc welding of brass, also braze welding of copper, steel and cast iron.
熔点880℃。黄铜气焊及碳弧焊用，也可钎焊铜、钢、铸铁
|
RBCuZn-B
|
|
S 229
|
Cu55 Ni6 Mn4
Zn余
|
Melting point is about 920℃, high strength. Braze welding of steel, nickel and hard carbide.
熔点约920℃。高强度,钎焊钢、镍及硬质合金用
|
|
|
Aluminum alloys
铝
合
金
|
S 301
|
Al≥99.5
|
Good ductility and corrosion resistance. Gas welding and argon arc welding of pure aluminum.
塑性好、耐蚀。纯铝气焊、氩弧焊用
|
ER1100
|
|
S 311
|
Si5 Al Rem.
|
Corrosion resistance, wide range of usage. Gas welding and argon arc welding of aluminum alloys other than high magnesium alloys.
抗裂性好，通用性大。铝合金气焊、氩弧焊用。不宜用高镁合金
|
ER4043
|
|
S 321
|
Mn1.3 Al Rem.
|
Good corrosion resistance, weldability and ductility. Gas welding and argon arc welding of aluminum alloys.
良好的耐蚀性、可焊性及塑性。铝合金气焊、氩弧焊用
|
|
|
S 331
|
Mg5 Mn0.4
Al Rem.
|
Corrosion resistance and high strength. Argon arc welding of aluminum alloys.
耐蚀，强度高。铝合金氩弧焊用
|
ER5183
|
斯米克钎焊料分别有：（铜锌钎焊料） ，（铜磷银基钎焊料），（铝基钎焊料），（锡铅钎焊料），（镍基钎焊料).简介如下：
|
Category
类 别
|
Trade-mark
牌号
|
Specification
规 格
|
Melting
Point
熔点(℃)
|
Chemical
composition
主要成份(%)
|
Application
用 途
|
Equivalent
to AWS
相当AWS
|
|
Copper
zinc
铜锌
|
L103
|
Wire & rod
丝
|
885-888
|
Cu54 Zn Rem.
|
Brazing of copper, bronze and steel, subjected to low load.
钎焊铜、青铜和钢等受力不大工件
|
|
|
L104
|
Foil
箔
|
890-930
|
Cu57 Mn2
Co2 Zn Rem.
|
Brazing of carbide cutting tool.
钎焊硬质合金刀具
|
|
|
Copper
phosphorus
铜磷
|
L201
|
Cast rod, wire & rod, powder
铸条、丝、粉
|
710-800
|
P7 Cu Rem.
|
Brazing of copper and copper alloys.
钎焊铜及铜合金
|
BCuP-2
|
|
L204
|
Cast rod, wire
铸条、丝
|
640-815
|
P5 Ag15
Cu Rem.
|
Brazing of copper, copper alloys, silver and molybdenum etc.
钎焊铜及铜合金、银、钼等金属。
|
BCuP-5
|
|
L205
|
Cast rod, wire & rod, powder
铸条、丝、箔
|
640-800
|
P6 Ag5
Cu Rem.
|
Brazing of copper and copper alloys.
钎焊铜及铜合金
|
BCuP-3
|
|
L207
|
Cast rod, wire & rod
铸条、丝
|
640-770
|
P7 Ag5
Cu Rem.
|
Brazing of copper and copper alloys.
钎焊铜及铜合金
|
BCuP-7
|
|
L209
|
Cast rod, wire
铸条、丝
|
684-710
|
P7 Ag2
Cu Rem.
|
Brazing of copper and copper alloys.
钎焊铜及铜合金。
|
BCuP-6
|
|
Silver
base
银基
|
L302
|
Wire & rod
丝
|
745-775
|
Ag25 Cu40
Zn Rem.
|
Brazing of copper, copper alloys, steel and stainless steel etc.
钎焊铜及铜合金、钢及不锈钢等
|
|
|
L303
|
Wire & rod
丝
|
660-725
|
Ag45 Cu30
Zn余
|
Brazing of copper, copper alloys, steel and stainless steel etc.
钎焊铜及铜合金、钢及不锈钢等
|
BAg-5
|
|
L303F
|
Flux coated rod
涂药丝
|
660-725
|
Ag45 Cu30
Zn Rem.
|
L303 coated with flux, the same application as L303.
外涂钎剂的L303，用途与L303相同
|
BAg-5
|
|
L304
|
Foil
箔
|
690-775
|
Ag50 Cu34
Zn Rem.
|
Brazing of copper, copper alloys and steel etc.
钎焊铜及铜合金、钢等
|
BAg-6
|
|
L308
|
Wire & rod
丝
|
779-780
|
Ag72 Cu Rem.
|
Brazing of copper and nickel under vacuum or reducing protective atmosphere.
铜和镍的真空或还原保护气氛钎焊
|
BAg-8
|
|
L312
|
Wire & rod
丝
|
595-605
|
Ag40.Cu.Zn.Cd
|
Brazing of copper, copper alloys, steel and stainless steel etc.
钎焊铜及铜合金、钢及不锈钢等
|
|
|
L313
|
Wire & rod
丝
|
625-635
|
Ag50.Cu.Zn.Cd
|
Brazing of copper, copper alloys, steel and stainless steel etc.
钎焊铜及铜合金、钢及不锈钢等
|
BAg-1a
|
|
L321
|
Wire & rod
丝
|
615-650
|
Ag56.Cu.Zn.Sn
|
Brazing of copper, copper alloys, steel and stainless steel etc.
钎焊铜及铜合金、钢及不锈钢等
|
BAg-7
|
|
L323
|
Wire & rod
丝
|
665-755
|
Ag30.Cu.Zn.Sn
|
Brazing of copper, copper alloys, steel and stainless steel etc.
钎焊铜及铜合金、钢及不锈钢等
|
|
|
L325
|
Wire & rod
丝
|
645-685
|
Ag45.Cu.Zn.Sn
|
Brazing of copper, copper alloys, steel and stainless steel etc.
钎焊铜及铜合金、钢及不锈钢等
|
BAg-36
|
|
L326
|
Wire & rod
丝
|
650-720
|
Ag38.Cu.Zn.Sn
|
Brazing of copper, copper alloys, steel and stainless steel etc.
钎焊铜及铜合金、钢及不锈钢等
|
BAg-34
|
|
Aluminum base
铝基
|
L400
|
Cast rod, wire & rod
铸条、丝
|
577-582
|
Si11.5
Al Rem.
|
Brazing of aluminum and aluminum alloys.
铝及铝合金的钎焊
|
BAlSi-4
|
|
L401
|
Cast rod
铸条
|
525-535
|
Si5 Cu28
Al Rem.
|
Brazing of aluminum and aluminum alloys.
铝及铝合金的钎焊
|
|
|
Tin lead
锡铅
|
L600
|
Wire & rod
丝
|
183-185
|
Sn60 Sb≤0.8
Pb Rem.
|
Soldering of fusible metals and heat-treated part.
易熔金属及热处理件的钎焊
|
60Sn
|
|
L601
|
Wire & rod
丝
|
183-227
|
Sn18 Sb2
Pb Rem.
|
Soldering of copper, copper alloys and galvanized iron plain sheet.
铜及铜合金、镀锌铁皮的钎焊。
|
18Sn
|
|
L602
|
Wire & rod
丝
|
183-256
|
Sn30 Sb2
Pb Rem.
|
Soldering of copper, brass, copper alloys and galvanized iron plain sheet.
铜、黄铜、铁、镀锌铁皮的钎焊
|
30Sn
|
|
L603
|
Wire & rod
丝
|
183-235
|
Sn40 Sb2
Pb Rem.
|
Soldering of copper, copper alloys, steel and zinc parts.
铜及铜合金、钢、锌制零件的钎焊
|
40Sn
|
|
L604
|
Wire & rod
丝
|
183-222
|
Sn90 Sb≤0.15
Pb Rem.
|
Soldering of copper and steel for food and medicine field.
食品、医疗所需铜、钢等金属的钎焊
|
90Sn
|
|
L605
|
Wire & rod
丝
|
232-240
|
Ag5 Sn95
|
Soldering of copper and steel for electrical and food field.
电器、食品所需铜、钢等金属的钎焊
|
|
|
L608
|
Wire & rod
丝
|
295-305
|
Sn5.5 Ag2.5
Pb Rem.
|
Soldering of copper, copper alloys, steel and stainless steel.
铜及铜合金、钢及不锈钢的钎焊
|
|
|
Nickel base
镍基
|
L702
|
Powder
粉
|
970-1000
|
Cr7 B3 Si4
Ni Rem.
|
Brazing of stainless steel under vacuum or protective atmosphere.
不锈钢真空或保护气氛钎焊
|
BNi-2
|
|
放大图片
暂无相关下载
