| 详细介绍：
济南天鑫数控设备有限公司
增强型钢的装配当门窗构标尺寸大于或等于规定的长度时,其内腔必须加强型钢.另外,对五金件装配处及组合门窗拼接处必须
加入增强型钢,增强型钢的装配在不影响焊接的部位预先插入并固定,。
Enhanced assembly type steel doors and windows. When the standard size is
greater than or equal to the specified length, the cavity must be reinforced
steel. In addition, the hardware must assembly and combination of stitching join
reinforced steel doors and windows, steel reinforced assembly without affecting
the welding part is inserted and fixed in advance,.
在十字型和T型连接处受力部位的型钢应在型材熔融后焊板刚刚提起时对接钢开始时插入,待焊后固定.增强型钢的紧固件不得少于3个,其间距不大于300mm,距型钢端头不大于100mm。
The steel in the cross type and T type connection parts of the force should
be in the profile after melting welding plate when inserted into the steel butt
just mentioned at the beginning, to be fixed after welding. Enhance the fastener
type steel shall not be less than 3, the distance is not more than 300mm, from
the end of the steel is less than 100mm.
焊接焊接时要注意焊接温度240-250°C进给压力0.3-0.35MPA,夹紧压力0.4-0.6MPA,熔融时间20-30秒,冷却时间25-30秒。
Welding should pay attention to welding temperature of 240-250 degrees C,
feed pressure 0.3-0.35MPA, clamping pressure 0.4-0.6MPA, melting time 20-30
seconds, cooling time 25-30 seconds.
清角、装胶条A、清角分手工清角和机械清角,焊接后,一般冷却30分钟后方可开始清角.B、将清角后的框,扇及玻璃压条,按照要求安装不同类型的胶条.框,扇胶条的上挺部位;胶条长度应长1%左右,防止胶条回缩。
Clear angle, A angle, the rubber industry of Qing Qing break angle and
mechanical angle, after welding, generally cool for 30 minutes before the
beginning of Qing Dynasty, the Qing angle.B angle frame, fan and glass bead, in
accordance with the requirements of different types of glue. Installation box,
fan tape is part; strip length should be about 1%, prevent the strip
retraction.
济南天鑫数控设备有限公司
济南天鑫数控设备有限公司( 15964542270)是一家专业从事铝塑门窗设备,断桥铝门窗设备，塑钢门窗设备，铝幕墙设备，中空玻璃设备的研发，生产，销售和技术服务的现代化高新技术企业。
公司铝门窗加工机器可完成铝型材的切割，组角，钻孔，冲孔，弯圆等工序，塑钢门窗设备可 完成型材切割，焊接，铣削，清理等工序。十大系列，四十余个品种设备，均得到了广大新老客户的一致好评。
济南天鑫数控设备有限公司
联系人：朱经理
电话：0531-85977876
传真：0531-85977876
手机：15964542270
网址：http://www.tianxincnc.com/
地址：济南市槐荫区工业园5-26-1号
中国升降机制造网：升降机 www.shengjiangji.biz
济南微信营销，济南微营销，济南微信推广www.weidaoshang.com
诺商商道系统，-专业互联网应用服务提供商：www.chinanovo.net
诺商商道系统，-专业互联网应用服务提供商：www.cn-un.net
诺商基于多年的优化经验和品牌基础推出的诺商商道系统，诺商信息您身边的互联网专家！
|
放大图片
暂无相关下载
