简要说明：斯米克牌的紫铜焊条T107产品：估价：75，规格：1.0-5.0，产品系列编号：齐全

　　

Copper alloys 铜 合 金		Cu 107紫铜		ECu		Red copper, atmosphere and sea water corrosion and excellent electric conductivity. Welding of red copper such as electrical copper row. 紫铜，耐大气，海水腐蚀，导电性好。紫铜焊接用，如导电铜排		ECu
		Cu 207硅青铜		ECuSi		Silicon bronze, corrosion resistance and high strength. Welding of copper, silicon bronze and brass. 硅青铜，耐蚀、强度高。铜、硅青铜及黄铜焊接用		ECuSi
		Cu		ECuSnB		Tin phosphor bronze, corrosion resistance and high strength. Welding of copper, silicon bronze and brass. 锡磷青铜，耐蚀、强度高。铜、硅青铜及黄铜焊接用		ECuSn-C
		Cu 237		ECuAl		Aluminum bronze, wear and corrosion and high strength. Welding or surfacing of copper alloys. 铝青铜，耐磨、耐蚀，强度高。铜合金焊接或堆焊用		ECuAl-A2
Aluminum alloys 铝 合 金		Al 109		TAl		Pure aluminum, excellent corrosion resistance and middle strength. Welding of pure aluminum. 纯铝，耐蚀性好，但强度不高，纯铝焊接用		E1100
		Al 209		TAlSi		Silicon aluminum, good crack resistance and wide range of usage. Welding of aluminum alloys other than aluminum magnesium alloys. 铝硅，抗裂性好，通用性大。铝合金焊接用，不宜焊接铝镁合金		E4043
		Al 309		TAMn		Manganese aluminum, corrosion resistance and high strength. Welding of aluminum alloys. 铝锰，强度高，耐蚀。铝合金焊接用		E3003
Nickel alloys 镍合金		Ni 102		ENi-1		Pure nickel. Welding and surfacing of nickel and nickel to steel. 纯镍，用于镍、镍与钢的焊接与堆焊		ENi-1
		Ni 207		ENiCu-7		Copper nickel. Welding and surfacing of copper nickel and copper nickel to steel. 镍铜，用于镍铜、镍铜与钢的焊接与堆焊		ENiCu-7
Copper alloys   铜   合   金	S 201 紫铜焊丝		Sn1 Si0.3Mn0.3 Cu Rem.		Good mechanical properties and crack resistance. Gas welding and argon arc welding of red copper. 机械性能好，抗裂性好。紫铜气焊及氩弧焊用		ERCu
	S 211硅青铜		Si3 Mn1 Cu Rem.		Good mechanical properties. Argon arc welding of copper alloys and MIG brazing of steel. 机械性能好，铜合金氩弧焊及钢的MIG钎焊用		ERCuSi-Al
	S 212锡青铜		Sn5 Cu Rem.		Wear resistance. Argon arc welding of copper alloys and surfacing of steel. 耐磨性好。铜合金氩弧焊及钢的堆焊用		ERCuSn-A
	S 213磷青铜焊丝		Sn8 Cu Rem.		Wear resistance. Argon arc welding of copper alloys and surfacing of steel. 耐磨性好。铜合金氩弧焊及钢的堆焊用		ERCuSn-C
	S 214铝青铜焊丝		Al7.5 Cu Rem.		Wear and corrosion resistance. Argon arc welding of copper alloys and surfacing of steel. 耐磨、耐蚀。铜合金氩弧焊及钢的堆焊用		ERCuAl-A1
	S 215铁铝青铜		Al9 Cu Rem.		Wear and corrosion resistance. Argon arc welding of copper alloys and surfacing of steel. 耐磨、耐蚀。铜合金氩弧焊及钢的堆焊用		ERCuAl-A2
	S 221黄铜焊丝		Cu60 Sn1 Si0.3 Zn Rem.		Melting point is about 890℃. Gas welding and carbon arc welding of brass, also braze welding of copper, steel and cast iron. 熔点约890℃。黄铜气焊及碳弧焊用，也可钎焊铜、钢、铸铁
	S 221F		Cu60 Sn1 Si 0.3 Zn Rem.		S221 welding rod coated with flux. 外涂焊剂的S221焊丝
	S 222铁黄铜		Cu58Sn0.9Si0.1 Fe0.8 Zn Rem.		Melting point is about 880℃. Gas welding and carbon arc welding of brass, also braze welding of copper, steel and cast iron. 熔点约880℃。黄铜气焊及碳弧焊用，也可钎焊铜、钢、铸铁		RBCuZn-C
	S 222F		Cu58Sn0.9Si0.1 Fe0.8 Zn Rem.		S222 welding rod coated with flux. 外涂焊剂的S222焊丝		RBCuZn-C
	S 223		Cu59 Sn0.6 Zn Rem.		Melting point is about 900℃. Braze welding of copper, steel and cast iron. 熔点约900℃。铜、钢、铸铁钎焊用		RBCuZn-A
	S 224		Cu62 Si0.5 Zn Rem.		Melting point is about 905℃. Gas welding and carbon arc welding of brass, also braze welding of copper, steel and cast iron. 熔点约905℃。黄铜气焊及碳弧焊用，也可钎焊铜、钢、铸铁
Copper alloys 铜 合 金	S 225		Cu48 Ni10 Zn Rem.		Melting point is about 935℃ and high strength. Braze welding of steel, nickel and carbide alloys. 熔点约935℃。高强度,钎焊钢、镍及硬质合金用		RBCuZn-D
	S 225F		Cu48 Ni10 Zn Rem.		S225 welding rod coated with flux. 外涂焊剂的S225焊丝		RBCuZn-D
	S 226		Cu60 Sn0.3 Si0.2 Zn Rem.		Melting point is about 900℃. Gas welding of brass, also braze welding of copper, steel and cast iron. 熔点约900℃。黄铜气焊用，也可钎焊铜、钢、铸铁
	S 227		Cu58Sn0.9Ni0.5 Si0.1 Fe0.8 Zn Rem.		Melting point is about 880℃. Gas welding and carbon arc welding of brass, also braze welding of copper, steel and cast iron. 熔点880℃。黄铜气焊及碳弧焊用，也可钎焊铜、钢、铸铁		RBCuZn-B
	S 229		Cu55 Ni6 Mn4 Zn余		Melting point is about 920℃, high strength. Braze welding of steel, nickel and hard carbide. 熔点约920℃。高强度,钎焊钢、镍及硬质合金用
Aluminum alloys 铝 合 金	S 301		Al≥99.5		Good ductility and corrosion resistance. Gas welding and argon arc welding of pure aluminum. 塑性好、耐蚀。纯铝气焊、氩弧焊用		ER1100
	S 311		Si5 Al Rem.		Corrosion resistance, wide range of usage. Gas welding and argon arc welding of aluminum alloys other than high magnesium alloys. 抗裂性好，通用性大。铝合金气焊、氩弧焊用。不宜用高镁合金		ER4043
	S 321		Mn1.3 Al Rem.		Good corrosion resistance, weldability and ductility. Gas welding and argon arc welding of aluminum alloys. 良好的耐蚀性、可焊性及塑性。铝合金气焊、氩弧焊用
	S 331		Mg5 Mn0.4 Al Rem.		Corrosion resistance and high strength. Argon arc welding of aluminum alloys. 耐蚀，强度高。铝合金氩弧焊用		ER5183