产品标准 standard
本产品按GB12706《额定电压35KV铜芯、铝芯塑料绝缘电力电缆》标准生产，同时还可根据用户需要按国际电工委员会推荐标准IEC、英国标准、德国标准及美国标准生产。The product is manufactured according to the standard of GB12706、IEC.BS,DIN and ICEA upon request.
适用范围 Applications
本产品适用于工频额定电压0.6/1KV及以下配电网或工业装置中固定敷设之用。
The product is suitable for use in power distribution lines or fixed installations with rated power- frequency voltage up to and including 0.6/1Kv.
使用特性 Operating characteridtles
·工频额定UO/U为0.6/1KV。
Rated power –frequency voltage UO/U为0.6/1KV。
电缆导体允许长期最高工作温度为90℃。
Max.permissible continuous operating temperature of conductor:90℃.
短路时（最长持续时间不超过5s）电缆导体的最高温度不超过250℃。
Max.short –circuit temperature of conductor shall not exceed 250℃(5s maximum duration ).
电缆敷设时环境温度应不低于0℃。
The ambient temperature under installation should not below 0℃.
电缆弯曲半径：不小于电缆外径的15倍。
The bending radius should not less than 15 times of cable diameter.
电缆的型号 Type of cable